Tile and grout cleaning; it's a never-ending battle. But not necessarily! You can take some steps to make your tile and grout look clean for longer. Whether you are dealing with newly installed tiles or have had the same flooring for years, read on for the best tips on keeping your tile and grout clean!

Tips On Keeping Your Tile And Grout Looking New!

Have you sealed your tile and cleaned it regularly, but noticed it still looks dirty? Here are a few things to keep in mind when it comes to tile and grout cleaning:

• Natural stone & grout are especially susceptible to staining because they are porous
• Tile and grout are both textured, so they can easily trap dirt and grime

To keep your tile and grout looking their best, follow these tips:

Sweep regularly to remove dirt and debris

It will help to prevent dirt and spills from being absorbed into the tile and grout. You don't have to do this every day, but weekly vacuuming or sweeping will help to keep your floors looking clean. Using a soft brush attachment on your vacuum is better to avoid scratching the tile.

Wipe up spills immediately

Spills can cause staining, so it's best to wipe them up as soon as possible. Use a damp cloth to wipe the spill, and then dry the area with a clean towel. Don't wait until the tile and grout are dry; this will make it harder to clean up.

Mop with a mild detergent

You can buy tile and grout cleaners at most hardware stores. If you don't want to use a tile and grout cleaner, you can use a mild detergent instead. Detergent acts as a surfactant and will loosen the dirt, which makes it easier to remove. Just make sure to rinse the floor thoroughly afterward so no soap residue is left behind.

Scrub with a stiff brush

Once you have mopped up as much water as possible, it's time to break out the scrub brush. Stone and grout are porous, which means they can absorb liquid, dirt, and grime. A good scrub with a stiff brush will help loosen any stubborn dirt or stains.

Rinse with clean water and dry thoroughly

Rinse the floor with clean water and dry it thoroughly with a clean towel. Use a clean, damp sponge or mop to remove any remaining dirt or cleaner. It is advised to avoid walking on your tile and grout until it is dry.

What Not To When Cleaning Your Tile And Grout

Cleaning tile and grout are indeed a challenge. Your tile and grout can become stained and discolored if you are not careful. You could be doing everything right and still end up with dirty tiles.



Don't use harsh chemicals: Harsh chemicals will strip the tile and grout of their natural oils, leaving them dry and brittle.

Don't use abrasive cleaners: Abrasive cleaners scratch the tile and grout, making them more susceptible to dirt and stains.

Don't forget to seal: Sealing your tile and grout will create a barrier that will make it easier to clean and protect your investment.

The Bottom Line

If you notice your tile and grout starting to look slightly worn down, don't fear! You can make them look new again with a little elbow grease or by calling in the experts at Casson & Son Carpet Care. In the meantime, make sure to keep up with regular cleaning and maintenance to prevent your tile and grout from getting too dirty.